Deutsch 
GEOFF ANDERSON Xera 4 pants grey
Extremely light and non-porous rain pants with a very strong fabric.
Our tip: The trousers have a very tight waistband, we recommend taking one size larger than usual.
- Free shipping from 100€
- Fast delivery (2-3 business days)
- Secure payment
- waterproof (20.000mm)
- highly breathable (20.000g)
- windproof
- 3 layer fabric made in Sweden
- saltwater resistant
- completely non-porous
- PTFE (Teflon) free
- environmentally friendly
- non toxic
- high tensile strength making it more "puncture proof"
- dynamic climate control
- flexible waist
- layers principle: outside (3rd layer)
Copyright Fa. Pijawetz
1 = collar
2 = chest circumference
3 = inseam arm
4 = sleeve length outside (from neck to ankle)
5 = hip circumference
6 = waist circumference
7 = leg length outside
8 = inseam leg
9 = head circumference
10 = back length (center back measured from neck to jacket hem)
| S | M | L | XL | 2XL | 3XL | |
| 5 | 109 | 112 | 115 | 120 | 126 | 130 |
| 6 | 65-93 | 70-96 | 77-100 | 84-104 | 86-110 | 88-115 |
| 8 | 72 | 74 | 76 | 77 | 78 | 79 |
Shell: 42% PA, 35% PU, 23% PA-mesh, Lining: 100% Polyamid
Reduced in weight, we have managed to design a shell fabric even greater tensile strength making it more "puncture proof".
The new shell features a waterproof, breathable film that enhances your comfort. It prevents external moisture and wind from penetrating through the fabric while allowing excess moisture to escape from the inside. It works on the principle of moisture movement through it by absorption into the film on the inside face, transport through the film by water vapor diffusion, and finally, evaporation from the outside face of the fabric.
In contrast to our competitors our technology has no pores that can become clogged, which could compromise moisture vapor transmission. Hence, moisture vapor transmission rates remain high during end use, and comfort is not compromised. This technology also exhibits good stretch and recovery qualities, which greatly reduces potential tears. On top of everything as a little something extra - it is recycable and non toxic. The abrasion qualities of the inner layer has been improved dramatically.
CARE WATERPROOF PANTS
Remember always to dry the pants completely after use. Wash it only when really necessary. Hand wash frequently. Impregnate the pants with suitable products – for example Nikwax spray. Storing the jacket in damp surroundings will facilitate rot and shorten the service life. Salt often shows itself as white spots. Wash according to the instructions below. Make sure that all zippers are free of salt crystals by washing them with fresh water.
Washing:
We recommend machine washing at 30°C. Wash the pants frequently using the gentle/wool-programme and preferably without soap. However, if you have been so lucky that the product smells like fish, use a suitable soap product. As an alternative, use normal detergent without chlorine. Do not use compact detergent or traditional softener. Always follow the washing instructions in the product. Close all zippers and Velcro parts.
CARE ZIPPER
A zipper should be closed and the slider fixed before cleaning. Left open, the tip of the slider may damage the fabric or the tape may become stretched or may shrink. The gearing of the elements can be damaged by forcing a slider that does not open or close smoothly. Apply paraffin or the lubricating spray "FastenerMate" to the front side and back of the elements and move the slider up and down several times to work in the lubricant and make the slider work smoothly.
Copyright Fa. Pijawetz
