GEOFF ANDERSON Urus 6 pants moss

• waterproof (10.000mm)
• breathable (12.600g)
• windproof
• stronger outer impregnation against water and dirt
• "gentle" velcro fasteners
• removable suspenders, adjustable
• increased back area
• Belt - optional
• elastic waistband on the back
• Waistband adjustable by means of Velcro fasteners
• Reinforced seat and knee area
• Inside made of highly functional microfiber
• extra long YKK zipper at the leg end, additionally fixable with velcro fastener
• Leg end waterproof even with open zipper thanks to fabric insert
• Size 3XL / JX: without YKK zipper and velcro fastener at leg end, can be shortened in length
• 2 side pockets with YKK zipper, water-repellent
• 2 leg pockets with Velcro and snap fastener
• Layer principle: outside (3rd layer)

Copyright Pijawetz Company

THE SYSTEM FABRIC T.S.F.
Shell1: 100% polyamide, Lining1: 100% polyester, Lining2: 100% polyamide

T.S.F. combines a group of different technical makes that work together as a 3-layer principle.
Excellent as a 3rd layer to protect against wind and weather.
The membranes are made of polyurethane and have microscopic pores that allow water vapor to pass through, but block water in liquid form. This provides better comfort, excess body moisture can escape to the outside through the membrane, while, for example, rain can not penetrate to the inside. The membranes are attached on the outside with a very strong nylon fabric, Taslan. This type of nylon is particularly resistant to wear and tear and is therefore suitable for many outdoor activities.
Waterproof up to 10.000mm, in relation a strong driving rain has about 1.000mm. Air permeability up to 12.600g/day. These data have been confirmed by an impartial technological institute. Oeko-Tex 100 certified.

Copyright Pijawetz Company

GENERAL RULES
After use, always store the garments dried and airy, never store them damp. Mildew stains and even mold could form and the life of the product will automatically be shortened.
Follow the care instructions on the labels!

CLEANING MEMBRANE CLOTHING
(Dozer, WS, LWS, MWS, Raptor, Xera, Urus, Zebu, Zoon)
Wash regularly, as the pores can become clogged, reducing breathability. Be sure to follow the care instructions on the labels. Light soiling on the outside can often be removed with a damp cloth and under running water. Close all zippers and Velcro closures before washing. All products should be washed without spinning. Use detergents suitable for membrane garments and wash with a suitable washing program. Special agents for the washing machine are available for basic cleaning, liquid mild detergent can also be used. Please adhere to the specified dosage information. If necessary, rinse again with an additional rinse program afterwards. Do not use fabric softener and/or bleach, as these can be harmful to the function of the membrane and the fibers. Hang the garment to dry immediately after washing.

IMPREGNATION OF MEMBRANE / WATERPROOF CLOTHING
Re-impregnate from time to time. Special sprays sprayed directly onto the outer surface are recommended for refreshing the impregnation. The exact instructions for this can be found on the bottle of the impregnation spray.

CARE OF ZIPERS
Dirt or salt particles also settle on the slider and zippers, which can affect its functionality. If the slider does not open or close smoothly, the zipper teeth and/or slider can be damaged. At the first signs of impaired function (the zipper is difficult to open and stick, signs of corrosion on the slider), it is recommended to use a lubricating spray or gel. YKK recommends "FastenerMate" for this purpose, which is applied to the front and back of the elements. Then carefully pull the slider on and off several times to allow the lubricant to work and the slider to operate smoothly again

Copyright Pijawetz Company